Considerations To Know About property maintenance

Exterior Repairs This Spring

Homeowners,

Here are three exterior repairs to watch out for in the backyard this year:

Water Damage/Wood Rot

Staining

Peeling Paint

Deck Wood Repair and Painting

Deck wood damage can get pretty bad, especially if your deck is on the shady side of the house. Rain and sun damage can eventually wear down the protective paint. Eventually the wood may need replacing. There are composite wood replacement materials out there that hold up pretty good. Typically the flat surfaces will need replacing. Stairs and hand rails will be the first to loose paint and start to rot. Also, to avoid accidents check for loose boards, protruding nails or anything else coming loose. See if your deck was built on concrete piles or a concrete foundation. Ensure that the supporting columns are not rotting. This usually happens right at the surface level where organic materials and water meet with the wood.

See what’s next after you replace the rotting wood:

Rust Prevention

You might have noticed rust stains dripping from the nails on your deck. Some may have rusted while others did not. Why did this happen?

There is a good chance that during your last deck repair or deck construction the nails were driven in using a pneumatic nail gun powered by an air compressor. These nail guns have a lot of power, and if you are using a zinc coated nail, the gun may scratch off the coating.

This zinc coating may give the impression that they will last as long as Galvanized nails. Often, this isn’t the case. If the zinc coating gets scratched off, the inner metal will eventually rust.

Instead of using zinc coated nails for your exterior repairs, use galvanized nails. The metals themselves are galvanized inside and out, they don’t use a coating. They will cost you 20% to 50% more, but you will avoid unsightly rust stains. If you decide not to replace the nails, you can spot prime any rusted nails with rust-inhibitor primer.

Find out what needs doing before painting:

Wood Prep Before Painting

When you are outside, keep an eye out for peeling paint, or any exposed wood on your home, fence and deck. See our article on Fencing. All exterior wood must be painted to avoid wood rot. Any rotted wood should be replaced. If you want to repaint, the peeling paint should be scraped off. Use a drop cloth on your lawn to catch any of the falling bits. Look for any cracks or gaps. Fill these with an exterior wood filler or Bondo. Sand the areas where the old paint transitions to wood. Remember, the paint is harder than the wood so be careful when feathering it out. Then it’s time to prime and paint your deck. Be sure to use plastic sheets and tape to protect your property from paint splashes. Paint from top to bottom, do the edging first, then do the rolling. If possible, paint during a cool part of the day to get the best adhesion.

See what looks like now:

The Finished Product

Now you are finished, You have a deck with the colors shining bright. You may have two complementary or contrasting colors that really liven up your deck. You can run your hand along the handrail without worry of slivers. All of the wood is sealed and smooth.

Here are some of the tools re recommend for the job

Cordless drills are certainly convenient options if you want to work on a drilling project without wires and the need for electric sockets. They work using an electric motor and rechargeable batteries. Remember that these equipment, along with the basic drilling, can also be used as a universal screwdriver or hammer. Basically, they are classified on the basis of their voltage. The basic models of 9.6 to 12 volts can be used for small fixtures at home, whereas those producing 12 to 18 volts are used in large DIY home improvement projects. Those with 18 to 24 volts are intended for professional use.

List of Best Cordless Drills

Bosch PS31-2A

For years, Bosch has been a reliable manufacturer for industrial tools. Its PS31-2A cordless drill is an ideal device for home improvement projects. With a maximum power of up to 12 volts from lithium-ion batteries and a weight of 2.1 lbs., drilling work is not much of a problem. It also has an LED light, which helps you in drilling in low light spaces. There are two speed adjustments that make it easier for using the appropriate power profile for drilling. At just about $150, it is not a deal worth missing out on.

Hitachi DS14DFL

Hitachi believes in what it offers, and as a result has a lifetime warranty for the DS14DFL cordless drill. With the battery producing up to 14.4 volts of power, you can use it for small fixtures or large home improvement tasks. An overall weight of 3.5 lbs helps you work for longer, continuous drills. A one-touch speed knob enables you to change two levels of the drill's rotation speeds for screw driving or drilling purposes. This drilling machine is available at a price of around $170.

Panasonic EY7440LN2L

The Panasonic cordless drill is small at just about 7 inches and has a weight of 3.5 lbs; which contributes to a comfortable handling. It is designed to best suit the needs of extended drilling, without making the person tired. The machine generates up to 14.4 volts of power. Along with the main drill, you also get a 14.4 volt light, which aids in drilling in dark conditions. At about $380, the price might seem a bit high though.

Makita FD01W

Tools manufactured by this brand are thought of as being durable. The FD01W cordless drill is durable and convenient for basic driving applications. Its 12 volts lithium-ion battery and up to 200 in.lbs. of maximum power is more than sufficient for small fixing and drilling projects. In addition, the built-in LED light helps with operations in the dark. It is extremely light at 2.0 lbs. This product is available at a price of $110 approximately.

DeWALT DCD710S2

As the DCD710S2 is small enough, it is easy to be used in hard-to-reach areas for drilling. The weight of just 2.4 pounds is what makes it a good option for overhead drilling. There are three LED lights inbuilt for clear visibility in low light places. This cordless drill works with a battery pack that provides a max output of 12 volts. The two speed transmission setting aids in using the right amount of power for particular drilling projects. It has been included in many of the best cordless drill reviews. This DeWALT product is priced at about $160.

There are many other models from the above-mentioned list of best cordless drills which you can opt for, considering the voltage and size requirements. For optimum use of any drill that you go for, https://www.yelp.com it is necessary to read and follow the instructions given in the manual. Improper handling and incorrect settings can reduce the efficiency of the tool.